Skywalker-Risen saber – A Master Series saber.

Hello Everybody, well! it’s less than a week to the release of the new film Rise of Skywalker! Can you believe that? And as it is such an exciting time for fans I felt I needed a BIG saber for possibly the BIGGEST Master of them all….Luke Skywalker! We didn’t really see him use his iconic green bladed hilt he constructed and so I thought why not show my version of this hilt today. This is my “Master Series” model of that iconic saber complete with a few hidden features. I did make a few videos and would have stitched them together to make a more polished production but unfortunately I had a few issues with my laptop again…but I did my best. Now Luke constructed his saber in a cave on Tatooine using the plans he obtained from Obi-Wan Kenobi’s homestead. There was a scene in Return of the Jedi of Luke completing his saber but it was cut out of the final edit, however here is that scene found on YouTube…

So I took a trip to a desert planet and set to work building my tribute saber and this is what I came up with…this is Skywalker-Risen…

I said a few posts back that I didn’t know how I was going to top my Graflex inspired saber model but with this hilt, I think I may just have surpassed any hilt I have modeled to date! I managed to recreate the beautiful emitter with the thin neck, complete with the copper accented drum part. Then comes the distinctive black and silver ribbed “grenade” grip part. Connected to the grenade handgrip is the main body of the hilt with the famous Control Box you can see Luke poking into with his screwdriver in the video. The control box has matching black and silver stripes on the top panel and is surrounded by decorative copper rails. On the side of the box are two triangular accent function lights and two black activation buttons. The hilt is finished off with a pommel that harks back to Obi-Wan’s saber from Star Wars ANH which looks like a tap/faucet knob…and it comes complete with  a triangular belt hanger loop!

This was a really detailed build and just to show you how detailed here is a picture of the model as I was building it…Jedi Master Build Studio 1 MK

As you can see there seems to be something going on inside the hilt, a lot of things to be precise! Yes, there is a crystal chamber in the handgrip AND a chamber in the pommel….and if that wasn’t enough, the control box cover slides open!

Look closely inside the control box and you will even find components fully modeled including Hex Head topped adjustment screws (these are what Luke is adjusting in the video above to set the blade length and power settings) and there are four power regulator capsules (which are actually real world resistors which I modeled). To show when the saber is correctly set the two LED indicators shine green! Here is another short little animation showing the Triple Reveal in action…

As you can see this hilt really is unbelievably complex! How I constructed it in a cave I don’t know, I just knew that if Master Luke managed it then I too had to. And to give you an idea of the conditions in that cave take a look at this…we’re going out on location in this video…

Again, I apologise for the video being short but I was on location and experiencing Technical Issues (hopefully in the New Year I will have a new laptop! Hopefully!)

Ok I have a final batch of images to give a slightly better look at all the little details and fancy bits and there is a DarkSide version of this hilt as well just for balance….

Phew! This is a LOOONG post! But I have one final crowning feature to show you all. So far my hilts have had static non moving blades, as I struggled to master the animation feature to recreate the extending blade and combining it with the glow effect….well watch this next clip and get ready for the “SNAP!-Hiss”…

I finally nailed the animation tricks needed to make the blade extend (and retract) and I thought I’d add a little sound effect too! Just in time for the new and sadly last movie in the Skywalker saga. I hope you enjoyed this design and my tribute to Master Skywalker’s saber, I certainly pushed every limit I could think of to accomplish it!

That just about wraps up this post but first I need to thank you (for reading this far and…) for all the support you have given me. Whether you are a first time visitor or a regular thanks so much for your time, likes and comments, you are very much appreciated. Now I have more new designs still to come in future posts and I will be writing a few posts about The Rise of Skywalker (I’m giving myself a birthday treat and getting VIP tickets to see it!) I hope you will return to see all of that and more! Till next time…

“Skywalker-Risen” is a For Tyeth Editions design/model and is ©Copyright of For Tyeth/FTSabersite 2016-2019. “Luke Skywalker”, “Star Wars – The Rise of Skywalker” and all other names, images, video and related material are Trademark/©Copyright of Disney/LucasFilm.

12 thoughts on “Skywalker-Risen saber – A Master Series saber.”

  1. Nice work FT. If yo r laptop is so old it is running Windows 7, you will need to update it soon. Try Linux Mint – you can try it from a USB stick first. Saying that I picked up a 3yr old laptop for £20 the other night that just needed an OS reinstallation. I could render your art out for you on my spare machines if you wish.

    1. Hello Neil, thanks so much for the kind words and offer of help! I am actually pricing up a few laptops at a site called EncorePC but I’d like to know which store has machines at £20. the cheapest I’ve found online was an old IBM/Lenovo Thinkpad for £99.

      1. It was a used machine. Bought via a social media sales group. Watch eBay. When business’ have a clear out there are often hundreds for sales cheaply. Old desktops are dirt cheap too.

      2. Ah thanks for the tip. I was just cautious about buying from ebay etc. Buying from a site like the one I mentioned the machines have been refurbished and have a “Return to base” warranty for a few months. I have seen desktops for less than £100 just waiting for some money back from my bank.

  2. WoW!
    This post has it all. You really outdid yourself with this Saber.
    All of the animations are fab. I especially like Control Box Reveal, then Risen Blade Extend.
    Congratulations!

    1. Hello Resa, thanks so much. I really wish I could have worked on the animations a little more and edited them together but my laptop was overheating from the length of time it took to compile them!

    1. Hi TVTA, I’m glad you like this Skywalker design. It took some time to get it all to work but the effort was worth it. I felt I had to do something big as tribute to the Star Wars saga if, as they say, this is the end. Thanks as always.

      1. I certainly hope so! Not sure how many sabers will be in the movie but as I design hilts inspired by just about anything I’m sure I’ll see a potential design to build somewhere!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.