Reaper and Boxcutter Sabers – for The Silent Ghost Reaper

Hello Everybody, today I hope to introduce you to a gentleman I have met recently on my travels around the Internet and in particular on YouTube. The Silent Ghost Reaper is the “Caped Consumer” who goes out and tests items of technology and gives us reviews of those products with a great attitude and sense of humour! SGR sorts out the “Good Buys from the Bad Buys” He reviews everything from voice activated remote control cars, to gaming monitors, Fidget Spinners, wireless headphones all the way through to Nano Drone Flying Gadgets! But unfortunately whilst cutting open a package, his beloved “Unboxing Knife” slipped and he carved a chunk out of his “Unboxing Table”! Well, I wondered what SGR’s reviews and unboxings would be like with a Lightsaber (because if trained in their use, they’re much safer believe it or not!.)
Now I have to say SGR already has I believe four Ultrasabers hilts (which he also reviewed and which first caught my attention) but he doesn’t have a “For Tyeth Edition” saber….until now! Yes I have designed a special hilt for this gent as way of saying thanks for his entertaining reviews and for replying to all the comments he receives. Not everyone on YouTube goes out of their way to respond so as I say I have a hilt for him and here it is, I call it Silent Ghost’s “REAPER”

I know SGR is fond of red blades so even though Red is normally associated with the Sith I gave his hilt a crimson blade. The blade itself projects from a triple clawed emitter so SGR can, when in time of need attach a cable to it and use the hilt as a Silent Ghost Grappling Hook! But the features don’t end there, oh no! The hilt also has a low profile switch section and a very versatile Tactical grip body. The Grenade Section body gives unparalleled grip whether you are wearing gloves or not! (Gloves can get snagged on Unboxing Knives!) And to finish the hilt there is another FTE Emitter Pommel with glowing power crystal chamber and bat like claws. Just the instrument to instil fear into product manufacturers who like to cut corners and offer inferior goods!

Ok, I know what you’re thinking…”For, isn’t a lightsber a bit big to cut open boxes and packages?” Hmm, maybe, so that is why I have also produced a Silent Ghost “BoxCutter” a short version, perfect for tackling the packing tape and peanuts found in parcels he receives! So here is a bonus gallery featuring Silent Ghost Reaper’s “BoxCutter“….

This slideshow requires JavaScript.

I hope you all liked these designs, especially you, Silent Ghost Reaper! I am sorry I can’t afford to get these constructed for you but I want to say thank you for the information and entertainment you share on your channel, which my viewers and followers can find by clicking The Silent Ghost Reaper’s YouTube Channel !

Please go and check it out. I hope one day The Silent Ghost Reaper can review a time machine for me so I can have more hours in the day as sadly I am approaching the time where I have to bring this post to an end. But as always, I want to thank Silent Ghost for allowing me to feature him on the site and to you, my loyal viewers and followers for the continued support you give me. It is appreciated. I hope you will all return to see future posts and designs by me and my good friends. Till next time.

“The Silent Ghost Reaper” is ©Copyright of The Silent Ghost Reaper and can be found on YouTube! The “Reaper” and “Boxcutter” sabers are For Tyeth Editions sabers and are ©Copyright of For Tyeth/FTSabersite 2017.

Advertisements

Informant Lightsaber for Bazine Netal

Hello Everybody, if this post is late I apologise but I have just got back from a mission to try and find this elusive character called Bazine Netal! Bazine is the shadowy female who was enjoying herself in Maz Kanata’s bar on Tokadano and radioed to the First Order that she had found the droid BB-8. You will have seen her wearing a very distinctly patterned and hooded costume. She wears the hood as a result of injuries she sustained on her first mission as an assassin where she was burnt with a flamethrower! After this first mission Bazine became a master of disguise and feared Bounty Hunter, using a snub nosed blaster (so uncivilised!), poisons, a mix of deadly Martial Arts and a couple of mini Thermal Detonators hidden in the heels of her shoes. Well I wondered what her lightsaber might look like if she had one, this is what I envisaged, this is INFORMANT

I think this is suitably distinctive for Bazine’s character! I couldn’t quite match the pattern on her costume exactly but it’s pretty similar. How Bazine expects to stay inconspicuous dressed in that outfit I don’t know (but the material does have sensor jamming equipment sewn into it!). Anyway back to the saber and it has a plain simple monochrome scheme and a “Bad Guys” red blade. The emitter looks a little like a silver version of her hood. The main focal point is surely the diamond patterned hand grip section, made to look like Bazine’s costume as much as possible..

Informant Material
I managed to get a sample of the material!

The pommel caps off the hilt to give it a traditional look (similar to my Sasayaki Shi – Whispered Death Lightsaber hilt). The switch section is functional for ease of use and has a nice choke point for spinning techniques.

Bazine had a hard upbringing (she was only fourteen when she carried out her first fateful mission). Netal was an orphan on the planet Chaaktil before a character called Delphi Kloda took her under his wing at his Combat School where she learnt her skills. Those skills must be good as I didn’t find her! That doesn’t mean I have given up but for now I am running out of time again.

So I will have to end here but want to say thank you once more to everyone who follows and supports me and FTSabersite, new and old. I have had visitors from Russia, India and Turkey this past week so thanks for calling in. Please call back and see what new designs I have coming up, including a hilt or two for a YouTube Crime Fighter! Till next time.

“Bazine Netal”, “Maz Kanata”, “Tokadano” and all other names, logos and related material are Trademark/©Copyright of Disney/LucasFilm.

Nite Owl: Glaux Lightsaber by Roger Redux

Hello Everybody, today we enter the shadowy world of The Watchmen again with this nice design from my friend Roger Redux. His design has a distinctly Ornithological theme to it as it is for the character called Nite Owl. Nite Owl is Daniel Dreiberg who was born in 1945 and would later become the second superhero to carry the Nite Owl name. Dreiberg was fascinated with technology and aviation. With his knowledge he created gadgets to aid his crime-fighting exploits, rather than relying on brute strength and force. He created a flying vehicle nicknamed “Owlship” and numerous other bits of kit. Roger however felt that Nite Owl needed a lightsaber, the pinnacle of elegance and technology, so designed this hilt, here is NITE OWL: GLAUX…

This certainly has a look of an owl to it, I can just imagine an owl sitting in a tree when I see the hilt held vertically. The emitter with it’s pointed spines look like the tufted feathers that stand up on an owl’s forehead (if they have a forehead that is!). The weathered finish of the hilt gives it a mottled appearance similar to the flecks and camouflage of the night hunter’s plumage. And to finish the hilt off, there is a beautiful brown leather wrapped body capped by a pommel which has strakes that give the impression the saber has talons!

Roger named the hilt after the Watchmen character, but also after a Greek coin. Roger informed me that the word Glaux translates as “Little Owl” in ancient Greek or simply “Owl” in modern Greek. The Owl appears on the back of one of the Athenian coins!

As usual I am running out of time for this post so may I say Thank You to Roger for allowing me to share this design with you all. As always I want to say thank you to all the visitors both regular followers and new viewers (I saw that some folks came from India and Indonesia this past week!). Your support is very much appreciated. I will end here so I can work on a few more new hilts. Till next time.

“Nite Owl: Glaux” is a Guest Designer saber and is ©Copyright of Roger Redux used here with permission. “Watchmen”, “Daniel Dreiberg”, “Nite Owl (II)” and all other names, images and related material are Trademark/©Copyright of D.C. Comics.

Tactician Lightsaber – For Thrawn

Hello Everybody, It is my turn to supply a design for you today after =Ottomatix=’s fabulous =HOMAGE= sabers last week. And I take you on a journey to the edges of the known galaxy, the fringes of the Outer Rim and the area called the “Unknown Regions”. There in the uncharted territory is a system which is home to a race of very distinctive individuals. They are the Chiss, and one particular Chiss became very well known in the Imperial Navy, his name? Mitt’raw’nuruodo, or as he was universally known, Grand Admiral Thrawn! Thrawn is a genius level strategist and rose through the ranks of the Imperial Navy after stowing aboard an Imperial ship and “joining up”. So here is my saber for the Grand Admiral, this is TACTICIAN

The Chiss have distinctive blue skin, dark bluish-black hair all framing deep red eyes, and I have tried to capture those features in this design. The sinister red blade projects from the clawed emitter (Thrawn served on a ship called the Blood Claw) and shines through two windows. These windows from certain angles look like the famous red eyes of the Chiss warrior himself. The switch and body sections are utilitarian, nothing fancy but look like the panels and plating found on starships from around the Imperial Navy. To finish the hilt off there is a pommel which also has a “pair of eyes” in the shape of the two painted blocks peering out from the pommel shroud…just in case you didn’t see the eyes in the emitter part  😀 !

Star-Wars-Thrawn
Grand Admiral Thrawn (Copyright Timothy Zahn – Disney/LucasFilm

Thrawn and the Chiss are characters that appear in Timothy Zahn’s novel named after it’s main character. The Chiss originally appeared in early Star Wars computer games as one of the alien life-form classes. Their popularity grew and Timothy Zahn wrote a trilogy of books featuring them which were discarded at first by George Lucas etc. But the Chiss and Thrawn have now been made “canon” by appearing in the Disney cartoon, Star Wars Rebels.

Well it seems I am running out of time and will have to make a “Tactical Withdrawal” back to my workshop to create more designs! However as always I want to say thank you to all of my viewers and followers, new and old for checking this saber out. I also have a special shout-out to Andy Pines (Me, Myself and Star Wars / Imperial Wookie), who guessed that this hilt was for an Imperial Naval Officer, you were very close! I hope you will all return for future posts to see new designs from me and my friends. Till next time.

“Grand Admiral Thrawn”, the “Chiss” and all other names, images and related material are Trademark/© Copyright of Disney/LucasFilm. “Thrawn” was written by Timothy Zahn and is published in hardback by Century Books. Cover image/artwork is © Copyright of Kent Akselen.

=HOMAGE= A saber pair by =OTTOMATIX=

Hello Everybody, I am slightly late with this post but I do have a valid reason! This last week I posted my 2000th post on the SaberForgeForum. I was congratulated by many of the members there and they thanked me for my contribution to the community. I felt very proud that I had made such an impression. One member even made a very tempting offer to help me expand my saber collection! One of the great people I have met on the forum is =OTTOMATIX=, who regular viewers and followers will remember from his “=Ottomatix=’s Slainte” St Patrick’s Day Saber Staff. Well today I have the honour of presenting another =OTTO= design, this one I have called Homage and I will explain the name after you have had a look …..

This is a really nice design that has a little detail that you may recognise, and that detail is an FTE Emitter Pommel! =OTTO= was one of the members who first congratulated me when I created the technique of using an emitter to make a lighted pommel, so when I saw he had used the same trick I was really pleased! As such I named the saber Homage (I hope you don’t mind =OTTO=) The hilt has a classic “Thin-necked” emitter and a lower section which looks as if it is a separate body part consisting of the switch, silver coloured coupler and the FTE pommel. But the brilliance of =OTTO= didn’t stop here, he also made a smaller version of the hilt to use in your weaker hand (also known as an Off-Hand hilt). And as I am feeling really happy at the moment here is a little bonus gallery to show off the Off-Hand version too!..

This slideshow requires JavaScript.

The lower half of the hilt remains the same but just by changing the emitter to a version with a short non ridged connector results in a hilt that creates a perfect partner to the full Two Handed saber. And to help differentiate the main blade from the Off Hand’s blade it is a nice Cyan colour to compliment the Amber! I think =OTTO= has a great imagination and talent.coming soon

I would like to take this opportunity to thank =OTTOMATIX= once again for allowing his work to be displayed here, and for being a friend to me during my time on the forums. I am now running out of time but as you can see I have another hilt on it’s way (and so far no-one has guessed who it might be for – Andy Pines, you were very close however!). I hope you will join me when I reveal who the mysterious recipient is in my next post, but for now thank you all my viewers and followers for checking out today’s post. Till next time.

=Homage= is an =OTTOMATIX= design and is © Copyright of =OTTOMATIX= used here with permission. FTSabersite and all it’s contents are covered by © Copyright of For Tyeth/FTSabersite 2017.