Tag Archives: Switchblade Saber

“Rey of Darkness” Saber – For Tyeth’s Edition

Hello Everybody, now technically as I type this it is 03:30 Friday morning in the UK, so it is the beginning of the weekend (sort of) but I am so excited I felt I had to post this now.

I have over the past 2-3 days been working on a 3D model of “Darkside” Rey’s new double lightsaber switchblade staff. I started off with a screengrab from the new trailer which was very blurry and didn’t show much detail, however I interpreted it as best I could and came up with this “windowed” version with a very poor looking hinge (that semi-circular black thing on the pommels)…

I thought it was OK as a base model to later modify and so I went crazy and spent most of the day “tinkering” to make it better and more accurate. I found a much sharper image of the saber and found that I had obviously made mistakes, the four windows were in fact part of a “Slotted” emitter with a circular “Glass Eye” window. A Glass Eye window is the round lens that is found near the emitter of a Graflex lightsaber which allows the light from the blade to shine through (In reality it was the lens for the light measuring mechanism of the Graflex camera flashgun handle). I realised I needed to tweak the proportions and thickness of the coloured bands, I also needed to add a few detail parts and REALLY needed to do something with the hinge. I believe that some film trickery helped how the saber looked in the trailer as it extends but I haven’t got that good to do an animation like that…yet! So here was my second build with a hinge I made based on a Universal Ball joint seen on drive shafts of cars…DarkRayStaff v2 Folded MKAs you can see I added a Universal Ball joint hinge, which is the two spherical pommels connected by a curved plate. The plate pivots 90degs at both ends so that the saber handles straighten out to point in opposite directions and form the staff. I also installed a couple of activation switches to match the blades, but I still knew I could do better so I worked on a more accurate hinge mechanism that looked like the one on screen (even if the bracket seen on screen can’t hinge!). I built the new hinge and that brings me to my final version which I present here. I am sure I have still gotten parts wrong but if I try and make more fixes then I might ruin what I have already (maybe when better footage/images are released I might revisit this hilt) Now onto the “Glamour Shots”…

I added a ring of Hexhead Wrench screws around the switch section along with a pair of switched (I am still not certain where the real switch position is so this could be changed later) Also added are the black rectangular blocks with the thumbscrews. The hinge, I suspect is an end cap for scaffolding poles used for mounting Amateur Radio enthusiasts’ antennae (this piece encloses/connects the bottom of the mounting scaffold pole and the bottom of the aerial tube itself). I think it looks like the one seen in the pictures and video. And now you want to see the staff version right? OK, here are the extended staff “Glamour Shots”…

Hopefully I have done a good job overall. This is the most intensive project I have done, both in detail and timeframe…a lot of detail in a very short amount of time to build. And I think I may have beaten the big names in custom saber manufacturers in displaying a version of this hilt!

Well that just about wraps up this post, except to say I am really looking forward to seeing “The Rise of Skywalker” in December (20th) and find out for certain whether Rey has turned to the Darkside or if this is a “Clone” of her, or even just a Force vision flashback/premonition (hard to see the future is, always in motion it is!). So as is my tradition, I’d like to thank you all for looking in on this design and for your support of me and my site. Whether you are a new visitor (and there have been a few recently) or a regular caller, you are all very much appreciated. If you liked what you saw please spread the word about FTSabersite to friends and be sure to call back to see many more new hilts and designs in future posts. Till next time…..

p.s. I hope you don’t mind but I’m going to have a rest over a long weekend now (Phew!) Back to work on Monday….

“Rey of Darkness” saber is a For Tyeth Editions rendition and is ©Copyright of For Tyeth/FTSabersite 2016-2019. The Rey “Switchblade” saber staff, and all Star Wars names, logos, images and related material are Trademark/©Copyright of Disney/LucasFilm ltd 2019.

“Rey of Darkness” Saber – The “Switchblade” saber update!

Hello Everybody, just a quick post to let you know I have been busy “tinkering” with my attempt to recreate the new “Switchblade” saber seen in the new teaser trailer for “The Rise of Skywalker”. I have managed to get a better resolution picture of the new saber/staff and so reworked my first attempt. Below is a “clay model” render to show the new build off (I feel like a car manufacturer showing of a new car shape with one of those clay sculpture models seen at motor shows!). In a change of schedule due to this new buzz there will be a FULL COLOUR gallery and post coming this weekend, but for now here’s that clay model picture just to get your attentions!Rey of Darkness 5Clay MK

Thanks for looking in on this announcement and I hope to see you all this weekend for my post on this model. Till this weekend…..

“Rey of Darkness” is a For Tyeth Editions design and is ©Copyright of For Tyeth/FTSabersite 2016-2019. It is based on the new lightsaber from the upcoming movie “The Rise of Skywalker” and all Trademarks/©Copyrights belong to Disney/LucasFilm 2019.